Sentry Page Protection
Member Login 
Member Login
Welcome, (First Name)!
Enter Member Area
Keeping your Front Loader Mould Free - February 2016
Put on a pair of rubber gloves. Then place an old towel on the floor in front of the washing machine door and place a bowel with a cup of White King in it. Have an old toothbrush handy. Then take 4 sheets of paper towel, fold them in half and then across lengthways until it looks like a long sausage. Dip it into the White King in the bowel and squeeze out some of it so it is not dripping but still saturated in the White King. Carefully stuff it in between the rubber grooves and continue the same right the whole 360 degree circumference of the rubber grooves of the machine. Leave it there for several hours and then remove the sheets of paper towel into the bowel and using your toothbrush and some dishwashing detergent and vinegar gently scrub away any mouldy residue. Rinse with water. Do this until there is no visible mould. It may take a little patience. Every time you have completed a wash cycle be sure to take a dry microfibre cloth, roll it up and stuff it into the rubber cavity where the water builds up and leave it there for a couple of hours. Always leave the door open and you will never have a problem again. It's the only way. And I had tried everything!
Contributed by Sophie Burness
Contributed by Sophie Burness